4
OTICON INTIGA FITTING GUIDE 5
Fitting Step 39
End Fitting 53
ConnectLine Concept 63
Streamer and mobile phones 69
Streamer and the TV Adapter 71
Streamer and the Phone Adapter 73
Streamer and ConnectLine Microphone 75
Audio Streaming 77
Streamer Firmware upgrade tool 80
How and when to upgrade Streamer 80
Service and Maintenance 83
FAQ’s 87
Contents
Introducing the Oticon Intiga family 6
Overview of Oticon Intiga 8
The Oticon Intiga fitting Range 9
Customising Oticon Intiga 10
The Top Shell 10
Selecting and Fitting Receiver Units 14
Receiver markings 14
Measuring the ear for correct
Receiver length 15
Attaching the ear grip 15
Removing the ear grip 17
Inserting and placing the device on the ear 17
Shaping the Receiver Unit 18
Earpieces 20
Dome and Intiga Micro Mould selection for
Standard Receiver 20
Selecting Dome 21
RITE Intiga Micro Moulds for the Standard
Receiver 22
Alternative Custom Moulds for
Standard Receivers 23
Short Vents 24
Long Vents 24
Attaching the Intiga Micro Mould 25
Removing the Intiga Micro Mould 27
Connecting Oticon Intiga to Genie 29
Programming Oticon Intiga for the first time 30
Follow up programming Oticon Intiga 33
nEARcom 34
Programming Oticon Intiga 36
Structure in Genie 36
Family Step 37
Selection Step 38
2
3
3
5
7
6
8
4
5
To Next Page
Loading...
