EasyManua.ls Logo

oticon Own 2 - Technical Information

oticon Own 2
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
70
About Getting started Daily use Options Tinnitus Warnings More info
Technical information
The hearing aids contain the following
two radio technologies:
The hearing aids contain a radio
transceiver using short range magnetic
induction technology operating at
3.84MHz. The magnetic eld strength of
the transmitter is very weak and always
below 15nW (typically below –40dBμA/m
at a distance of 10meters (–12.20dBμA/
ft at a distance of 33feet).
The hearing aids also contain a radio
transceiver using Bluetooth Low Energy
and a proprietary, short range radio
technology both operating at ISM band
2.4GHz. The radio transmitter is weak and
always below 3mW equal to 4.8dBm in
total radiated power.
Only use your hearing aids in areas where
wireless transmission is permitted.
The hearing aids comply with
international standards concerning
radio transmitters, electromagnetic
compatibility, and human exposure.
Due to the limited space available on the
hearing aid, relevant approval markings
can be found in this booklet. Additional
information can be found in the “Technical
Data Sheet” on www.oticon.com