Manual
TYPE 87
Table of content Page-number
1. Chairlift in general 4
1.1 Basics 4
1.2 Need-to-know locations on the PCB 4
1.3 Names and locations 5
1.4 Definition left/right 5
1.5 Software version 5
2. Functionality and connections 6
2.1 Controls 6
2.2 Safety inputs 6
2.3 Sensitive edges safety inputs 6
2.4 Other inputs 7
2.5 Outputs 8
3. Dipswitches on the PCB 9
4. Programming the chairlift 10
4.1 Need to know before programming 10
4.2 Programming the chairlift 11
5. Bypass-connectors and interconnections 12
5.1 Bypass-connectors 12
5.2 Interconnections on the PCB 12
5.3 Logic of pin-numbers 12
6. Charging the batteries 13
6.1 Charging-points 13
6.2 No-charging-alarm 13
6.3 Transformer /on board charging-circuit 13
6.4 Battery-fuse 14
6.5 Sleepmode 14
6.6 Lift will not be used for a longer period 14
To Next Page
Loading...
