3
7. Remotes / transmitters and receivers 15
7.1 Programming the 2-channel remotes into the 2-channel receiver 15
7.2 Reverse logic up/down of 2 channel remote 15
7.3 Adjusting the dipswitches of the 1-channel transmitter and receiver 16
7.4 Types and type numbers 16
8. Powered hinge 17
8.1 Powered sliding hinge 17
8.2 Powered folding hinge 17
8.3 Warning for older type of PCB’s 18
8.4 Sliding hinge uses too much current 18
9. Error-handling for mechanic 19
9.1 Display 19
9.2 LED’s on the PCB 20
9.3 Error-log 20
9.4 8888x error 21
9.5 Fuse safety-line 22
9.6 Reset 22
9.7 Reposition 22
9.8 Working description Over speed governor 23
9.9 Working description folding rail 24
9.10 Working of proximity switch 25
10. Error-handling for the user of the chairlift 26
10.1 Operating the chairlift 26
10.2 Logic of the LED in the armrest 26
10.3 Logic of the beeper 27
Attachments. 86900 PCB eng => drawing of lay-out PCB and info
86900 S1 eng => schematics main PCB 86900
86900 CW1 eng => connection of wiring, page 1
86900 CW2 eng => connection of wiring, page 2
86900 SS eng => connection of wiring powered sliding hinge
86900 FSSv6 eng => schematic powered sliding hinge PCB ssp 042 v6
86900 KS eng => connection of wiring powered folding hinge
86900 KS logic eng => logic of LED’s powered folding hinge PCB ssp 007/008 v3
86900 FKSv3 eng => schematic powered folding hinge PCB ssp 007/008 v3
86900 LD eng => connection of wiring charging-point
87900 error eng => logic of display-errors
86900 EH eng => logic LED armrest and beeper
86900 PS eng. => connection of proximity switch (sensor)
87900 SB eng. => connection and voltages of servicebox
To Next Page
Loading...
