CAUTION
Lack of driving experience
Tipping over, falling due to errors in handling the product
► Practise on level, open ground first.
► Learn with the support of an assistant how the product reacts to changes in centre of gravity, e.g.downward
or upward slopes, inclines or when overcoming obstacles.
CAUTION
Leaning forward in the wheelchair
Tipping over, overturning due to incorrect centre of gravity
► Do not lean too far out of the wheelchair when trying to pick up objects.
► Lean well forward with your upper body when climbing gradients, overcoming obstacles on gradients or on
ramps. If users cannot lean their upper body forward, accompanying persons must support the wheelchair
from behind.
CAUTION
Risky operation
Falling, tipping over backwards due to approaching obstacles incorrectly
► Push slowly when crossing obstacles (e.g. steps, curbs) and negotiating uphill or downhill slopes and
inclines.
► Never cross obstacles at an angle. Always approach obstacles head on (at an angle of 90°).
► Raise the front wheels before crossing obstacles.
► Avoid collisions with obstacles and dropping off curbs/ledges.
► Avoid riding cross-country.
CAUTION
Lack of tipping resistance on public transport
Tipping over, user falls, damage to the product due to incorrect positioning
► When using public transit, always observe the currently applicable legal requirements and the safety notices
of the public transit operator.
► Use the permanently installed seats in the vehicle. If you depend on using your wheelchair as a seat, please
use the designated wheelchair spaces and safety securing equipment provided. Always ensure that you are
held in place securely.
CAUTION
Incorrect handling at level crossings
User may fall or tip over due to driving error
► Only cross railway systems and railway tracks in the designated areas.
► Negotiate level crossings so the caster wheels of the product cannot get caught in the gap between the rail
and the road surface.
CAUTION
Driving in the dark
Risk of collisions with other traffic participants due to lack of lighting
► Wear bright clothing or clothing with reflectors.
► Install active lighting on your product.
► Ensure that the reflectors on the product are clearly visible.
10
Safety
Start M2S, Start M2
To Next Page
Loading...
Need help?
General
