Otto Bock Start M2S - Preparation for Use; Assembly Procedures

Label Meaning
I Symbol for medical device
J Serial number (PI)
3),1)
K Global Trade Item Number (DI)
4)
1)
YYYY = year of manufacture; WW = week of manufacture; PP = production site; XXXX = sequential production
number
2)
YYYY = year of manufacture; MM = month of manufacture; DD = day of manufacture
3)
UDI-PI to GS1 standard; UDI = Unique Device Identifier, PI = Product Identifier
4)
UDI-DI to GS1 standard; UDI = Unique Device Identifier, DI = Device Identifier
4.5.2 Warning labels
Label Meaning
(For installation of anchor point on the wheelchair only)
Fixation point/anchor point to attach the wheelchair in vehicles
for transporting persons with reduced mobility
5 Delivery
5.1 Scope of delivery
• Wheelchair ready for use
• Instructions for use (user)
5.2 Options
The standard model can be fitted to the user's personal requirements thanks to a large range of options. For use of
these options: see Page15 ff.
5.3 Storage
5.3.1 Storage during daily use
The wheelchair must be stored in a dry place.
5.3.2 Storage during extended disuse
The wheelchair must be stored in a dry place. During longer storage periods, an ambient temperature between
-10°C and +40°C must be maintained.
It is not necessary to disassemble or fold up the wheelchair.
During extended storage, the knee lever wheel lock on wheelchairs with PU tyres (=tubeless tyres) must be
released since tyre deformation may otherwise result.
Tyres contain chemical substances that can react with other chemical substances (such as cleaning agents, acids,
etc.).
6 Preparation for use
6.1 Assembly
CAUTION
Exposed pinch points
Crushing, pinching due to incorrect handling
► When folding the wheelchair out or together, only grip by the specified components.
13Start M2S, Start M2
Delivery