Figure1.3: Thissymbol indicatesthat thesensoremitslaserradiation.
Figure1.4: Thissymbolindicatesthepresenceofa hotsurfacethat maycauseskinburn.
TheOS2isahermeticallysealedunit,and isnonuser-serviceable.
Useofcontrols,oradjustments,orperformanceofproceduresotherthanthosespecifiedherein,
mayresultinhazardousradiationexposure.
Use of the OS2 is subject to the Terms of Sale that you agreed and signed with Ouster or your
distributor/integrator. Includedinthesetermsaretheprohibitionsof:
Removingorotherwise openingthesensor housing
Inspectingtheinternalsof thesensor
Reverse-engineeringanypart ofthesensor
Permittinganythirdpartytodoanyoftheforegoing
Operating the sensor without the attached mount that is shipped with the sensor, or attaching
the sensor to a surface of inappropriate thermal capacity runs the risk of having the sensor
overheatundercertain circumstances.
This product emits Class 1 invisible laser radiation. The entire window is considered to be the
laseraperture. WhileClass1lasersareconsideredtobe“eyesafe”,avoidprolongeddirectview-
ingofthelaseranddonotuse opticalinstrumentstoviewthelaser.
Whenoperated in anambient temperature>40�°C,themetallic surfaces ofthe sensor maybe
hot enough to potentially cause skin burn. Avoid skin contact with the sensor’s base, lid and
the heatsink when the sensor is operated under these conditions. The sensor should not be
used in an ambient temperatureabove 50°C. The maximum safety certified ambient operating
temperatureis50°C.
PRECAUTIONS:
L’OS2 est une unité hermétiquement scellée, qui ne peut être entretenue ou modifiée par
l’utilisateur.
L’utilisation de commandes, de réglages, ou l’exécution de procédures autres que celles spéci-
fiéesdansleprésentdocumentpeuvententraînerdes rayonnementslaserdangereux.
4
To Next Page
Loading...
