Outback Power Systems FLEXnet DC User Manual

23
llifetime kAH removed shows the total kilowatt amp hours
removed from the battery. This is essentially an “odometer” for
battery usage. Press the <DOWN> soft key to continue.
STATUS/DC/BATT
lifetime kAH removed 5
DOWN UP RESET TOP
Press the rst two soft keys to return to the MAIN menu.
STATUS/DC/BATT----------------
end of battery
status menu
UP TOP STATUS
Press the <ADV> soft key.
MAIN-------------------------------
11:30:55A
SUM STATUS SETUP ADV
This screen acts as a warning intended to keep those
unfamiliar with an OutBack system from altering the settings.
Push any key to advance to the enter the password screen.
ADV/SETTINGS/WARNING
Changes made could adversely
effect system performance
Push the <INC> soft key until 141 appears; this is the
password.
ADV/PASSWORD
enter the password
132
ENTER INC DEC EXIT
When 141 appears on the screen, press the <ENTER> soft
key.
ADV/PASSWORD
enter the password
141
ENTER INC DEC EXIT
Press the <DC> soft key.
ADV--------------------------------
choose device:
FX CC DC MATE

Outback Power Systems FLEXnet DC Specifications

General

Brand	Outback Power Systems
Model	FLEXnet DC
Category	Battery Charger
Language	English