11
Slide the Wheels (C20) over
each end of the axle. Secure
the wheels into place with the
M8 Locknuts (D7).
Insert the Axle (C21) through the clamping brackets underneath the
Gas Bottle Holder (C17) and tighten the clamping screws. Take care
not to over tighten these screws which will damage the plastic gas
bottle holder.
Slide a Wheel Spacer (C19) over each end of the Axle (C21). Note:
the spacers are packed in a plastic bag with the main electrode,
grease cup holder and grease cup.
Attach the Body Support (B13) to the legs
using M6x15 Bolts (D1).
Note: The notches on these supports
should be on the outside in order to attach
the body more easily.
Carefully turn the completed trolley over, right
side up.
6
5
Excel 100T Excel 200T Excel 300T
Excel 100T Excel 200T Excel 300T
C17
C21
C19
C20
D7
D1
B13
To Next Page
Loading...
Need help?
General
