15
S-176-9-E
9. GENERAL SPECIFICATIONS
(1) Flow Ranges
Viscosity
Meter Size
Water
0.3mP
a
・
s to less
than 0.8mP
a
・
s
0.8mP
a
・
s to less
than 2.0mP
a
・
s
2.0mP
a
・
s to less
than 5.0mP
a
・
s
5.0mP
a
・
s to less
than 200mP
a
・
s
5.0mP
a
・
s to less
than 1000mP
a
・
s
Rotor
Material
Super Micro 38
0.09 to 3
― ― ― ― ―
PEEK resin
Super Micro 39
― ―
0.12 to 6 0.12 to 6
― ―
PPS resin
40
―
1.5 to 50 1.0 to 50 0.7 to 50
―
0.5 to 50 Special resin
41
―
3.0 to 100 2.0 to 100 1.5 to 100
―
1.0 to 100 Special resin
―
7.0 to 100 4.0 to 100 2.0 to 100 1.0 to 100
―
Stainless steel
45
―
10.0 to 500 7.0 to 500 4.0 to 500
―
2.5 to 500 Special resin
―
25.0 to 500 15.0 to 500 7.0 to 500 3.5 to 500
―
Stainless steel
(2) Meter Body
Item Description
Meter Size Super Micro 38 (
※
1) Super Micro 39 40 4
1 45
Connections/Nominal Dia R
1/4 male
G1/8(w / tting: Rc1/4 (
※
3))
Rp1/8 (6mm) Rp1/8 (6mm) Rp1/4 (8mm)
Accuracy
0.09 to less than 0.18L/h
±10% RD
0.18 to 3L/h ±3%RD
0.12 to less than 0.3L/h ±8% RD
0.3 to 6L/h ±3% RD
±1% of reading
Operating Temp. Range −10 to +60℃ −20 to +80℃
Max. Operating Pressure 0.3MPa 0.49MPa 0.98MPa
Material
(
※
2)
Meter Body P C L C L C C L C C
Rotors P P K K K K C K K C
NOTES:
※
1
. Acceptable physical orientation of Meter Size 38 is bottom to top only.
※
2. C: Stainless steel (basic body SUS316; rotors SUS316 sintered)
L: Aluminum + anodized aluminum (Meter material “L” is not serviceable for water and
corrosive liquids.)
K: Special resin
P: PPS resin (For applications other than water, pure water, and oils, consult the factory.)
P: PEEK resin (water and pure water only) Meter Size 38 only.
※
3. Fittings furnished with Meter Size 39 have a built-in 300 mesh net.
Unit in L/h
To Next Page
