30
Example
---------------------
---------------------
STORE MEASUREMENT
MEASUREMENT STORE
? DE LE TE ?
No
Example of the listing of all stored measured values
P
rinting the memory content shows the sequence of measurement!
Print-out of measured data (example)
Date: 30.03.00
Project number: 47/2000
Project: Multiple dwelling unit
Address of project: Neubaustrasse 7, 59939 Olsberg
Builder-owner: Herbert Häusle, Marktplatz 3, 59939 Olsberg
Specifying engineer: Rudi Rechner
Plumber: August Röhrich
Listing of all stored measured values
Name Group no. Valve no. Valve DN
Pre-
Nominal Actual.
Diff.pressure
setting flow [m
3
/h] flow [m
3
/h] [mbar]
Cellar 1 1
Hydrocon
15 1.36 0.15 0.15 78.03
Cellar 1 2
Hydrocon
15 2.63 0.30 0.31 78.45
Cellar 1 3
Hydrocon
20 3.60 0.60 0.61 78.32
Cellar 1 4
Hydrocon
25 1.90 0.70 0.69 77.91
View content
It is possible to view the measured values (access by pressing the key “OK”).
The measurements which are stored can be viewed by using the keys
and .
When moving to “group” or “number” by using the keys and , the
desired measurement can be selected by using the keys and .
The menu option can be exited by pressing the key .
Clear memory
It is possible to delete the stored measuring data. The display shows the mes-
sage “Measurement store? Delete? No”. “No” can be changed to “Yes” by
using the keys and .The command to delete the whole memory content
has to be confirmed by pressing the key “OK”. Before deleting, it is recom-
mended to have the memory content printed via the USB interface.
After having deleted the memory content, new measurements can be stored.
If all storage locations are occupied, it is not possible to store any more
measurements and the sequence shown on the right appears (procedure as
described above).
---------------------
---------------------
Print content
View content
Clear memory
MEMORY
---------------------
---------------------
Print content
View content
Clear memory
MEMORY
---------------------
---------------------
STORE MEASUREMENT
MEASUREMENT STORE
? DE LE TE ?
Yes
---------------------
---------------------
MAIN MENU
SYSTEM-SETUP
MEASUREMENT-SETUP
V
ALVE-SETUP
M
EASURE (START)
TEMP. MEASUREMENT
---------------------
---------------------
English
sound: on
light: off
lighttime: 00 s
charge batteries
memory
SYSTEM-SETUP
To Next Page
Loading...
Need help?
General