Safety
CAUTION, WARNING &
DANGER: WHAT THEY MEAN
Hazards are identified by the “Safety Alert
Symbol” and followed by a signal word:
Caution, Warning or Danger.
DECALS
The decals on the machine provide instruction
for safe and correct operation.
Never make modifications affecting the safe
operation or capacity without the expressed
written approval of OverBuilt, Incorporated.
When OverBuilt approved modifications are
made, the user is responsible for seeing that
appropriate decals and instructions are
changed.
All plates and decals must be in place and
legible at all times.
OPERATOR QUALIFICATIONS
AND TRAINING
⇒
⇒⇒
⇒
Only trained and authorized persons
should operate the machine. To be
qualified, you must understand the
written instructions supplied by the
manufacture, have training (including
the actual operation of this machine)
and know the safety rules and
regulations of the job site.
⇒
⇒⇒
⇒
Do not operate the machine until you
fully understand the function of all
controls, indicators and instruments.
1
To Next Page
Loading...