EasyManua.ls Logo

Ovesco remOVE DC Impulse - Page 31

Ovesco remOVE DC Impulse
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English; Version 08 | 2019-04-24
remOVE DC Impulse 400.01
Instructions for use
31 / 32
2. Operational test
Result
2.1 Are all components available?
Components must be complete
passed failed
annex, where appropriate
2.2 Do all LEDs light up correctly? (On/Off display,
status display)
All LEDs must light up according to the in-
structions for use.
passed failed
annex, where appropriate
2.3 Is the successful completion of the charging
cycle indicated by three short acoustic signals?
Completion of charging cycle must be indi-
cated by three short acoustic signals
passed failed
annex, where appropriate
Defects/Comments:
Overall evaluation:
No Safety or functional defects were detected.
No direct risk, the detected defects can be fixed shortly.
The device has to be withdrawn from use until the defects are corrected.
The device does not meet the requirements Modifications/Replacement of com-
ponents/removal from service is recommended.
Contact the manufacturer if there is any deviation, abnormality and/or an indica-
tion of error.
The next inspection should be carried out after 12 months.
Name of the inspector
Date / signature