Owon B35 Manual

4.Bluetooth Function –only for the model with Bluetooth
10
In relative measurement, the manual range mode will be activated
automatically. (The relative measurement should be carried out under a
certain range, that is, this function is only available under the manual range
mode.) Analog bar graph is not displayed.
Note: This function is not available when measuring diodes, transistor, and
frequency.
Buzzer Feature
 Press the function key, the buzzer emits a short beep.
 One minute before Auto Power-off, the buzzer will beep five times to
warn. Before shutoff, the buzzer will emit a long beep, and then the
multimeter will shut off.
 The buzzer beeps continuously to warn once the measured DC voltage
exceeds 1000 V, AC voltage exceeds 750 V, or the voltage in DC/AC mV
mode exceeds 600.0 mV.
 The buzzer emits a long beep when the short circuit resistance is less
than about 30Ω during the continuity test.
 When the Bluetooth function is idle for 10 minutes, the Bluetooth will be
turned off automatically. Before turning off, the buzzer will beep twice.
4. Bluetooth Function –only for the model with Bluetooth
How to Connect with Android Device
(1) Install the free application software for Android on your Android smart
device.
(2) Launch the "Multimeter" application.
(3) Turn on the multimeter, press and hold until appear on the
display.
(4) Click the icon on the top left of the screen to launch device connection.

Owon B35 Specifications

General

Brand	Owon
Model	B35
Category	Multimeter
Language	English