(6) The measurements will be shown if the connection is successful. You can
tap on the
softkey on the right to add another multimeter.
How to Connect with Computer – only for B35(T)+ or B41T(+)
To connect the multimeter to a computer, a Bluetooth USB dongle should be
plugged into the USB port of computer.
Use only the Bluetooth USB dongle (optional) supplied with the product.
The computer must be running the Windows operating system
(Windows 10, Windows 8, Windows 7, Windows Vista, Windows XP).
Step 1: Install multimeterBLE software
Install the multimeterBLE software on your computer.
Step 2: Install driver of Bluetooth USB dongle
(1) Navigate to the multimeterBLE software installation folder (for example,
C:\Program Files\multimeterBLE).
Double-click BLE-CC254x-1.4.1.43908.exe in this folder.
To Next Page
Loading...
