Owon B35 - Voice out function; Upgrade Online; Data Graph and Table

6.Appendix
27
Appendix B: General Care and Cleaning
Warning: To avoid electrical shock or damage to the multimeter,
ensure that the insides of the casing stay dry at all times.
Cleaning
To clean the instrument exterior, perform the following steps:
Wipe the dust from the instrument surface with a soft cloth. Do not
make any scuffing on the screen when clean the LCD. Clean the
instrument with a wet soft cloth not dripping water. It is recommended
to scrub with soft detergent or fresh water. To avoid damage to the
instrument, do not use any corrosive chemical cleaning agent.
Dirt or moisture in the terminals can distort readings. Follow the steps
below to clean your multimeter.
1. Turn the multimeter off and remove the test leads.
2. Turn the multimeter over and shake out the dirt in the terminals.
3. Wipe the contacts in each terminal with a clean swab dipped in
alcohol.
2017.11 V1.6.1