the instrument cannot work.
VII. To Connect with Mobile Device_Only for CM2100B
The AC/DC clamp ammeter can communicate with the mobile device through Bluetooth connection,
making the measurement more secure. You can view the measured data of the AC/DC clamp
ammeter, perform remote control, display data charts, and store the measurement data in CSV
format on the mobile terminal through the free application software. The number of records that can
be stored in the mobile APP is based on the remaining storage space on your mobile device. A
mobile phone can be connected to several AC and DC clamp ammeters at the same time.
Note: The effective distance of Bluetooth communication is 7~ 8 meters, and is further in a wide
range of open and unshielded environment, even more than 20 meters. The Bluetooth function of
the AC/DC clamp ammeter will be automatically turned off after 10 minutes of inactivity. Before the
automatic shutdown, there are two short "beeps".
Installation of Free APP
Requirements of APPs in Different Versions for Mobile Device System
Bluetooth 4.0 Android APP
It is applicable for Android 6.0 or above systems and Bluetooth BLE 4.0 Android devices.
Bluetooth 4.0 iOS APP
It is applicable for iOS11.0 or above systems and Bluetooth BLE 4.0, but not applicable for
iPhone 5 and older models.
For Android device
Please use your mobile device to scan the QR code below, click the APP installation package,
download and install it.
For iPhone
You can search "OWON iMeter" on Apple Store, click the icon to obtain the APP installation
package, download and install it.
To Next Page
Loading...
