Owon CM2100 - How to Connect with Mobile Device

12
Note: The following help contents may not be completely consistent with the latest APP and be for
reference only. The latest version of the User’s Manual can be obtained from our website.
How to Connect with Mobile Device
(1) Download and install the free AC/DC clamp ammeter APP on the mobile device.
(2) Enable Bluetooth on the mobile device, and open the "AC/DC clamp ammeter" APP.
(3) After the AC/DC clamp ammeter is turned on, please hold and press the ZERO/ button until
the Bluetooth sign appears in the upper left corner of the display.
(4) Click "+" button in the upper left corner of the mobile device to add the AC/DC clamp ammeter.
(5) Enter the "Add Device" interface.
(6) Select the required AC/DC clamp ammeter in the "Available devices".