I. Basic Overview
CM2100 AC/ DC clamp ammeter is characterized by high reliability, high safety, high accuracy
and small size. Its resolution reaches 1mA and the maximum range is 100A AC\DC. This
product has unique VFC start-up mode and can accurately measure the voltage and current of
VFC after entering the mode; it has true virtual value response of voltage or current, full range
overload protection, reliable measuring precision and unique appearance design so that it
becomes a new generation of practical electrical/ electric measuring instrument.
II. General Inspection
After you get a new clamp ammeter, make a check on the instrument according to the following
steps:
1. Check whether there is any damage caused by transportation.
If it is found that the packaging carton or the foamed plastic protection cushion has suffered
serious damage, do not throw it away first till the complete device and its accessories succeed
in the electrical and mechanical property tests.
2. Check the Accessories
The supplied accessories have been already described in the Appendix of this Manual. You
can check whether there is any loss of accessories with reference to this description. If it is
found that there is any accessory lost or damaged, please get in touch with our distributor
responsible for this service or our local offices.
3. Check the Complete Instrument
If it is found that there is damage to the appearance of the instrument, or the instrument can
not work normally, or fails in the performance test, please get in touch with our distributor
responsible for this business or our local offices. If there is damage to the instrument caused
by the transportation, please keep the package. With the transportation department or our
distributor responsible for this business informed about it, a repairing or replacement of the
instrument will be arranged by us.
III.Safety Information
Safety Considerations
Before any operations, please read the following safety precautions to avoid any possible
bodily injury and prevent damage to this product or any other products connected. To avoid
any contingent danger, use this product only as specified.
EC Declaration of Conformity:
Meets intent of Directive 2004/108/EC for Electromagnetic Compatibility.
To Next Page
Loading...
Need help?
General
