Offline Recording Function of AC/ DC Clamp Ammeter
When the AC/DC clamp ammeter is used for measurement, the device APP sends a command to
enable offline recording function of AC/DC clamp ammeter. After receiving the command, the
AC/DC clamp ammeter is automatically disconnected, and can automatically save the
measurement data in the storage area of the instrument under offline state. After completing the
recording, reconnect the AC/DC clamp ammeter in the APP, and read the measured data and save
it in a CSV file. This function can realize the automatic and unmanned recording of data for a long
time to reduce Bluetooth power consumption and save the electric quantity of AC and DC clamp
ammeter.
Note: When the " " symbol appears on the display of the AC/DC clamp ammeter (in low battery
level), the offline recording function may be abnormal. Before using this function, please check the
battery level of the AC/DC clamp ammeter to ensure sufficient battery level.
(1) Connect the device to the AC/DC clamp ammeter, as shown in "How to Connect with Mobile
Device on P12.
(2) In APP device view, click "Start to record" button.
To Next Page
Loading...
