Note: When the AC/DC clamp ammeter is in the data recording state but the recording has not
been completed, if you connect the Android device to the AC/DC clamp ammeter at this time,
the following selection box will pop up:
If you select Stop recording option, the data recording of the AC/DC clamp ammeter will be
interrupted and the Android device is connected to the AC/DC clamp ammeter. You can
proceed to the next step to read the record.
If you select Continue and disconnect option, then the AC/DC clamp ammeter will continue to
record data, and will not be connected with the Android device temporarily.
(4) After the recording is completed, please reconnect the Android device to the AC/DC clamp
ammeter to read the data recorded offline.
(5) In APP device view, click "Record read " button.
To Next Page
Loading...
