To Next PageTo Next Page
Need help?Do you have a question about the Owon DGE1030 and is the answer not in the manual?
General| Model | DGE1030 |
|---|---|
| Category | Portable Generator |
| Noise Level | 65 dB |
| Starting System | Recoil Start |
| Weight | 45 kg |
| Rated Power | 2800 Watts |
| Max Power | 3.0 kW |
| Engine Type | 4-stroke OHV |
| Fuel Tank Capacity | 15 L |
| Outlet | 2 x 230V AC, 1 x 12V DC |
Identifies and explains the function of each control on the front panel.
Details the connectors and ports located on the rear of the instrument.
Provides instructions for connecting power and turning on the device.
Explains the main display elements and their meanings.
Describes how to turn the output of a specific channel on or off.
Lists available waveform types and how to select them.
Guides on setting parameters for the sine wave output.
Instructions on how to adjust the frequency or period of the output signal.
Instructions for adjusting the pulse width and duty cycle of the output.
Instructions for setting up arbitrary waveform outputs.
Instructions for creating frequency sweep signals.
Guides on configuring sweep type, time, start/stop frequencies.
Instructions for creating burst pulse train outputs.
Introduces modulation types like AM, FM, PM, FSK.
Accesses menus for display, channel, and system settings.
Resets the instrument to its original factory configuration.
Provides instructions for updating the instrument's firmware.
Details the steps for downloading, copying, and applying firmware updates.
Steps to install the necessary software for PC communication.
Guides on setting up communication ports for PC connection.
Steps to resolve issues with a black or blank display screen.
Diagnoses why measured signal amplitude differs from the displayed value.
