Need help?Do you have a question about the Owon DGE2000 Series and is the answer not in the manual?
General| Brand | Owon |
|---|---|
| Model | DGE2000 Series |
| Category | Portable Generator |
| Language | English |
Precautions to avoid bodily injury, fire, and product damage during operation.
Guidelines for proper grounding, fuse usage, ventilation, and environment.
Rules for covers, exposure, and operating in hazardous conditions.
Definitions of terms like Warning, Caution, Danger used in the manual and on the product.
Explanation of safety symbols like Hazardous Voltage, Refer to Manual, and Grounding.
Steps for checking transportation damage, accessories, and overall instrument condition.
Identification and function of front panel controls and indicators.
Identification and function of rear panel connectors and features.
Steps to power on the instrument and an overview of the user interface elements.
How to select and configure channels for waveform generation.
Methods to view and modify parameters for multiple channels simultaneously.
Procedures for turning channels on/off and general waveform selection.
Detailed steps and interface for generating sine waves.
How to adjust frequency, period, amplitude, and offset for waveforms.
Adjusting high/low voltage levels and configuring waveform phase.
Steps for generating and configuring square wave parameters.
Instructions for generating and setting ramp wave parameters.
Adjusting ramp symmetry and procedures for pulse wave generation.
How to adjust pulse width and duty cycle for pulse waveforms.
Definitions and formulas related to pulse width and duty cycle.
Setting pulse rise/fall times, generating noise, and configuring arbitrary waveforms.
Guide to selecting predefined waveforms from the generator's library.
Procedures for writing and recalling custom waveforms via PC software.
How to generate and configure sweep signals.
Procedures for creating and configuring burst waveform outputs.
Detailed steps for setting up N-cycle burst parameters like cycles and trigger.
Overview of supported modulation types: AM, FM, PM, FSK.
How to configure and generate Amplitude Modulation signals.
Setting carrier and modulating wave parameters for AM.
How to configure and generate Frequency Modulation signals.
How to configure and generate Phase Modulation signals.
How to configure and generate Frequency Shift Keying signals.
Information on saving and managing instrument settings.
Steps for connecting to PC and reading waveform data using software.
How to adjust display brightness and configure screen saver options.
Adjusting the screen brightness level of the instrument.
Configuring the automatic screen saver function to protect the screen.
Setting data separators and configuring load impedance for channels.
Changing display language and enabling/disabling the instrument's beeper.
Configuring USB communication and restoring factory default settings.
Solutions for a black screen issue upon powering the instrument.
Troubleshooting steps when measured amplitude differs from displayed value.
Technical details on bandwidth, sample rate, resolution, and frequency characteristics.
Output amplitude range, accuracy, and sine wave signal characteristics.
Specs for square, ramp, pulse, noise, arbitrary waves, and modulation types.
Parameters for sweep generation and burst waveform specifications.
Details on communication interface, display, power, environment, dimensions, and weight.
List of items included in the product package.
Guidelines for maintaining and cleaning the instrument and probes safely.
To Next Page
