Owon DGE2000 Series User Manual

5.Panel Operation
36
Sweep Type
Linear
Start Frequency
100. Hz
Stop Frequency
1 kHz
Center Frequency
550 Hz
Frequency Span
900 Hz
Burst
Factory Setting
Burst Period
1 s
Number of Cycles
1
Trigger Source
Internal
Utility
Factory Setting
Backlight
50%
Screen Saver
On
Screen Saver Time
30 Minute
Thousand Separator
Space
CH1 load
High Z
CH2 load
High Z
USB device
USB TMC
Language
Factory Delivery Setting
Beeper
On
Firmware Update
Use the rear-panel USB port to update your instrument firmware using a USB
memory device.
Caution: Updating your instrument firmware is a sensitive operation, to
prevent damage to the instrument, do not power off the instrument or
remove the USB memory device during the update process.
To update your instrument firmware, do the following:
1. Press the Utility button,press the System softkey,press Nextpage to next
page,press Upgrade ,the instrument weill have a prompt message.
2. Press the OK button,the external disk icon is displayed on the PC .
3. Visit the company's website on the PC and select the required instrument
firmware upgrade package for the corresponding model. Download the
“ AG. upp “ file in the firmware upgrade package to the PC, and copy the
firmware to the external disk that is displayed.
4. Restart the device. After the device is powered on, the upgrade status is

Owon DGE2000 Series Specifications

General

Brand	Owon
Model	DGE2000 Series
Category	Portable Generator
Language	English