8. Appendix
Appendix A: Accessories
⚫ 1 ×DC power adapter
⚫ 1 × USB power cable
⚫ 1 × Quick Guide
⚫ 1 × BNC/Q9 cable
⚫ 1 × BNC to alligator cable
⚫ 1 × USB communication cable
Appendix B: General Care and Cleaning
General Maintenance
Do not store or leave the instrument where the liquid crystal display will be exposed to
direct sunlight for long periods of time.
Caution: To avoid any damage to the instrument or probe, do not exposed it to any sprays,
liquids, or solvents.
Cleaning
Inspect the instrument and probes as often as operating conditions require. To clean the
instrument exterior, perform the following steps:
1. Wipe the dust from the instrument and probe surface with a soft cloth. Do not make any
scuffing on the transparent LCD protection screen when clean the LCD screen.
2. Disconnect power before cleaning your instrument. Clean the instrument with a wet soft
cloth not dripping water. It is recommended to scrub with soft detergent or fresh water. To
avoid damage to the instrument or probe, do not use any corrosive chemical cleaning
agent.
Warning: Before power on again for operation, it is required to confirm that the
instrument has already been dried completely, avoiding any electrical short circuit
or bodily injury resulting from the moisture.
To Previous Page
Loading...
Need help?
General
