Owon DGE1030 User Manual

5
.
Panel Operation
12
Offset/Low Level, Phase, Width/Duty , Rise and Fall.
To set the Frequency/Period, Amplitude/High Level, Offset/Low Level, Phase,
please refer to Output Sine Wave on page 7.
Figure 5- 7
：
Pulse wave user interface
Set the pulse width/duty cycle
Press NextPage softkey,and then press Width/Duty softkey to confirm
whether the Width menu item is highlighted;if not,press Width/Duty softkey to
switch to Width.In Parameter 5 of Figure 5- 7, a cursor appears in the
parameter value. Turn the knob to change the value directly, or use the
numeric keypad to input the desired value and choose the unit.

Owon DGE1030 Specifications

General

Brand	Owon
Model	DGE1030
Category	Portable Generator
Language	English