Owon SPE Series User Manual

3.Quick Review
6
3.1.3 User Interface
Channel output status
Actual output power
Display cumulative
running time
CV: Constant Voltage output
CC: Constant Current output
Actual voltage output
Actual current output
Set values of voltage
Set values of current
Set values of O.V.P
Set values of O.C.P
Figure 3-3 User Interface
3.2 General Inspection
After you get a new power supply, it is recommended that you should make a
check on the instrument according to the following steps:
1. Check whether there is any damage caused by transportation.
If it is found that the packaging carton or the foamed plastic protection
cushion has suffered serious damage, do not throw it away first till the
complete device and its accessories succeed in the electrical and
mechanical property tests.
2. Check the Accessories
The supplied accessories have been already described in the
"Appendix A: Enclosure" of this Manual. You can check whether there is
any loss of accessories with reference to this description. If it is found
that there is any accessory lost or damaged, please get in touch with
the distributor of our responsible for this service or our local offices.
3. Check the Complete Instrument

Owon SPE Series Specifications

General

Brand	Owon
Model	SPE Series
Category	Power Supply
Language	English