⚫ If the problem still exists, please contact us for our service.
2. The output is abnormal:
⚫ Check if the output voltage is set to 0V. If so, set it to other value.
⚫ Check if the output current is set to 0A. If so, set it to other value.
⚫ When in programmable output status, check if there is any
voltage/current value is set to 0. If so, set it to other value.
⚫ If the problem still exists, please contact us for our service.
6. Appendix
6.1 Appendix A：Accessories
（The accessories subject to final delivery. ）
6.2 Appendix B: General Care and Cleaning
General Care
Do not store or leave the instrument where the liquid crystal display could be
exposed to direct sunlight for long periods of time.
Caution: To avoid any damage to the instrument, do not exposed it to any
sprays, liquids, or solvents.
Cleaning
To Next Page
Loading...
Need help?
General
