4.6 Set Automatic Output at Power-on
The user can turn on or turn off the "automatic output at power-on" function by
pressing and holding the On/Off function key for 3 seconds.
（1） The steps are as follows The user can turn on or turn off the "automatic output
at power-on" function by pressing and holding the On/Off function key for 3
seconds. The steps are as follows:
（2） When the "automatic output at power-on" is turned off, after power-on, the
instrument is in the standby state. The user needs to manually perform the
"On/Off" operation, then the instrument will output.
4.7 Display
Press the Display function key to choose to display the measurement data in
To Next Page
Loading...
Need help?
General
