Owon XDM1241 - Powering On the Multimeter

2.Quick Start
9
Secondary function
Primary function reading
Primary function
Figure 2-5 User interface (Dual display)
Power On
(1) Model with AC power supply: Connect the instrument to the AC supply using the
supplied power cord.
Model with DC power supply: use the USB to DC cable provided in the accessory to
connect the instrument to the USB adapter, it can also be powered by USB Type-C.
Warning:
To avoid electric shock, the instrument must be grounded properly.
When using an adapter for power supply, it is recommended to use a
grounded adapter, otherwise it may have a certain impact on the
measurement.
(2) Press down the power button at the front panel, the screen shows the boot screen.