4
INSPECT YOUR XS1
XS1 DIAGRAM
NOTICES
Familiarize yourself with the XS1 by reviewing each part of the device, ensuring that each part is in safe operating
conditions.
See XS1 DIAGRAM on page 4.
DO NOT use the device if it is damaged or contains worn or broken parts. Use only replacement parts supplied by
OxeFit.
MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. Each label contains important informa-
tion. Familiarize yourself with all warnings on the XS1 before use. If a warning label is damaged or lost, contact OxeFit
for a replacement immediately. Please read all labels before using your XS1. It is the responsibility of the owner to
ensure that users are aware of all warnings and precautions before use.
MAINTAIN ALL EQUIPMENT: Preventative maintenance is crucial to maintaining the functionality and safety of
this equipment and keeping the equipment in safe operating condition. Failure to conduct preventative care may
cause the equipment to operate hazardously. Equipment must be inspected and maintained at regular intervals.
See CARE & MAINTENANCE on page 17.
A. VERTICAL POSITIONER
(x2)
B. SLIDE CONNECTION &
CABLE (x2)
C. SPEAKER (x2)
D. 32” TOUCHSCREEN
E. FORCE PLATE
F. MICROPHONE
G. SLIDE HANDLE/RACK
HOOK (x2)
H. DECK CONNECTION (x2)
I. FOLDABLE DECK
J. DECK HANDLE
*(x2) Located on both right
and left sides of the XS1
This device is designed to comply with Part 15
of the FCC Rules.
Operation is subject to the following two con-
ditions:
(1) This device may not cause harmful interfer-
ence, and (2) this device must accept any inter-
ference received, including interference that
may cause undesired operation.
Contains:
FCC ID: SH6MDBT42Q
Contains:
IC ID: 8017A-MDBT42Q
SAFETY | NOTICES XS1 USER MANUAL 4
FIGURE 1
A
B
C
D
E
F
G
H
I
J
To Next Page
Loading...