11
6.8.6 Due Calibration Date
Here, you can save the due-date for your next pipette calibration.
Steps:
1. Select Calibration from the main menu.
2. Select Enter Password from the Calibration menu. Enter “0000” if you have not set your
own password.
3. Select Due Cal. Date using the Up/Down arrow keys.
4. Enter the date in DD/MM/YY format. You will then be directed to the calibration menu.
6.8.7 Edit Password
This feature allows the user to edit their password. This ensures that only authorized
personnel can modify the calibration settings.
Steps:
1. Select Calibration from the main menu.
2. Select Edit Password.
3. Enter the existing password using the Up/Down arrow keys. The default password is
“0000”.
4. Enter the new password using the Up/Down arrow keys and then press OK.
5. Repeat the New Password and press OK.
6. “Password Change Successful” will appear on the display.
6.8.8 Forgot Password
If you forget your password, please contact your supplier. They will be able to reset your
password for you.
7. Warning/Safety Precautions
To prevent fire, electric shock or serious injury to users, follow the safety instructions
below.
• Do not submerge the unit or its charger in any liquid.
• Do not operate a charger if the cord is damaged.
• Only use chargers that are compatible with the pipette.
• Do not handle the charger unit with moist hands.
• Do not burn, crush or damage the lithium battery, or expose it to excessive heat.
• Only use the recommended battery.
To Next Page
Loading...
