Oxford BenchMate E - Pipette Anatomy and Controls; Pipette Operational Modes; Favorites Mode

3
6.1.1 Edit
This option allows you to edit your saved Favorite programs. You can also change the
sequence of saved programs.
Edit Program
This option allows you to edit the pipetting mode, aspiration speed, dispensing speed and
volume. You can also delete the program entirely using this option.
Steps:
1. Select Favorites.
2. Select Edit.
3. Select Edit Prog.
4. Select any of the following options:
a) Mode: This will allow you to change the pipetting mode.
b) Volume: This will allow you the change the liquid volume.
c) Speed: This will allow you to change the aspiration and dispensing speed.
d) Save & Exit: Exit the mode after saving the program.
e) Do Not Save: It will not save any changes.
f) Delete prog: This will delete the selected program.
Edit Sequence
This will allow the user to edit the sequence or order in which the saved programs are listed.
Steps:
1. Select Favorites.
2. Select Edit.
3. Select Edit Seq.
4. Select the program whose position you want to change.
5. Press OK button.
6. Select the position with which you want to swap your program, using the Up/Down
arrow keys.
7. Press OK button. You will be redirected to the Favorites menu where you can see the
changes.
6.2 Pipetting
This will allow you to aspirate and dispense your selected volume in a standard and straight
forward pipetting mode.
Steps:
1. Select Pipetting from the main menu.
2. Select the desired volume using the Up/Down arrow keys.
3. Press OK to finalize the volume.
4. Press the trigger key to aspirate the volume.
5. Press the trigger key to dispense the volume.
6. Press the trigger key again to repeat the process, or press the ESC key to exit the mode.
-5-