Oxford BenchMate E - Electronic Pipette; Introduction; Volume Range; Before You Start

1
1. Introduction
The BenchMate E Electronic Pipette from Oxford Lab Products offers one of the most
ergonomic designs in the field of liquid handling devices. The ergonomic design of this
electronic pipettes reduces the risk of repetitive strain injuries (RSI). The intuitive and easy-
to-use functions and features of this electronic pipette allow easy access to, and setting of,
each operational mode. The electronically operated piston movement reduces the risk of user
or human error, and provides a greater level of accuracy than mechanical pipetting.
2. Volume Range
3. Before You Start
Please verify your box includes following:
• Electronic Pipette
• Li-ion Battery
• Charger
• User Guide
• Calibration Report
• Tool Kit
• Grease Container
• Tips
4. Getting Started
Please insert the Li-ion battery as shown in section 8.1. Charge the battery for 3 hours, or
until the charging icon bar in the upper right-hand corner of the display screen stops pulsing.
Follow the charging instructions as shown and described in section 8.2 of this manual.
Switch on the Pipette by switching the ON/OFF switch to the ON position. The pipette is now
ready for use.