Modulation, here you can change the selected CC on Track Menu screen per step, by default is Mod
Wheel.
When Step-Chord button is active, holding a step will take you to the Step Submenu, here you can
edit:
Tglid or Track Glide. As the name suggests, this is a track parameter. It changes the time it takes for
the continuous pitch to reach the next note.
Note that the sound engine must support pitch bend in order to work.
Trig or Trigger Logic, same as explained before.
Retrig sets the times the note is triggered during the step duration, up to 5 times. For better
resolution change the Time Division of the Sequencer or Track.
When fully CCW you get to SKIP, if selected the step timing will be ignored by the transport bar, thus
making the sequence length shorter.
–––––––––––––––––––––
Use Skip to abruptly change the timing and feel of the pattern.
Randomize Skip steps to get different sequence lengths every bar and adding and removing notes,
in Retrig on Random Perform screen.
–––––––––––––––––––––
Offset, sets the time deviation of the note from -40% to 40% of the current time division. 25% is a
±
quarter deviation from the duration of the step.
KEYBOARD
In Multitrack Keyboard you can perform all tracks at once as a drum kit or each track individually with
the full keyboard with the press of a button. There’s also handy shortcuts for soloing and muting
individual tracks.
1st to 12th column is the perform area. It changes from 8 pads highlighted, one per track, to play as
a drum kit; or a full keyboard when Arm Track is active (14th column).
To Next Page
Loading...