OXI ELECTRONIC INSTRUMENTS One - Shortcuts; General Shortcuts; Sequencer Shortcuts

SHORTCUTS
Turquoise represents the secondary color, all secondary functions
are triggered/accessed by SHIFT button.
GENERAL
- Long press Sequencer 1-4: Sequencer configuration screen
- MUTE + Sequencer 1-4: Turn On/Off the sequencer for playback
- SHIFT + Keys (Preview): Turn On/Off preview to listen the pressed notes on the sequencer view
- Step + Copy: Copy selected step parameters
- Step + Paste: Paste selected step parameters
- Sequencer 1-4 + Copy: Copy selected Sequencer
- Sequencer 1-4 + Paste: Paste selected Sequencer (It behaves differently depending on which
modes are both the copied and the pasted Sequencers)
- Page button (16, 32…) + Copy: copy page (16 steps)
- Page button (16, 32…) + Paste: paste a previously copied page
- SHIFT + Mute: Nudge Menu
ENCODERS
- 1st encoder turn: Set Global Velocity
- 2nd encoder turn: Set Global Octave Offset
- 3rd encoder turn: Set Global Gate
- 4th encoder turn: Set Global CC Modulation
- SHIFT + 1st encoder turn: Change tempo
- SHIFT + 2nd encoder turn: Change sequencer swing
- SHIFT + 3rd encoder turn: Change sequencer scale
- SHIFT + 4th encoder turn: Change sequencer root note of the scale
- SHIFT + 1st encoder press: Back to the stored project tempo
- SHIFT + 2nd encoder press: Reset swing (no swing)
- SHIFT + 3rd encoder press: Reset scale to default: chromatic
- SHIFT + 4th encoder press: Reset root note to default: C
MONOPHONIC, CHORD AND POLYPHONIC
Piano Roll
- Sequencer 1-4 + any pad not active : Transpose the sequence (MONO & CHORDS)
distance and direction set by the pad pressed (NOT IN POLY)
- Init + End + two steps: LOOP activated between the pressed steps.
- Double click Page number: Access to 80, 96, 112 and 128 Pages respectively
- Init + Page button (16, 32…, press twice to access longer Pages; 80, 96...): Select the first step of
the selected page as the initial step of the sequencer.
- End + Page button (16, 32…, press twice to access longer Pages; 80, 96...): Select the last step of
the selected page as the end step of the sequencer.
50