Chapter 6: Tail Assembly
Tail Shaft Assembly
( Box3/bag 3 )
OXY0812-OXY5 Tail Shaft
OXY1059-2.5x14 Dowel Pin
OXY1061-Bushing 6x8.5x3.6
OXY0966-19T Tail Pulley
Set Screw M4x3
Tail Pitch Slider Assembly
( Box3/bag 4 )
Tail Pitch Slider Bushing
Important Note:
This part, for tuning reasons,
comes factory pre assembled,
it's ready to use.
8x12x3.5 Radial Bearing
Tail Pitch Slider Ring
Tail Pitch Slider Half Moon
OXY1038-2x3x3 Bushing
OXY1042-OXY5 Link Control
2xM2x6 Hex Cap Screw
page 11
loctite 243
loctite 243
Important note:
This part comes pre assembled
WITHOUT thread lock. It MUST be
re-assembled with thread lock as shown.
loctite 648
To Next Page
Loading...
