Tail Belt Crank Support Assembly
( Box3/bag 5 )
Chapter 6: Tail Assembly
Tail Belt Crank Support Assembly
( Box3/bag 5 )
Tail Belt Crank Support Assembly
( Box3/bag 5 )
Tail Belt Crank Support Assembly
( Box3/bag 5 )
OXY0883 - Belt Pulley
2 x 4x8x3 Flange Bearing
OXY0823 - Tail Belt Tensioner Bushing
OXY0817-OXY5 Tail Bell Crank
OXY1058 - Tail Bell Crank Pin
OXY0818 - Tail Bell Crank Support
2 x OXY0818
Tail Bell Crank Support
Important Note:
This part, for tuning reasons,
comes factory pre assembled,
it's ready to use.
OXY0977- Bell Crank Arm
OXY0874-5mm Ball Servo Arm
3 x M2x6 Hex Cap Screw
page 12
Important Note:
This part, for tuning reasons,
comes factory pre assembled,
it's ready to use.
Important Note:
This part comes pre assembled
WITHOUT thread lock. It MUST be
re-assembled with thread lock as shown
Important Note:
This part comes pre assembled
WITHOUT thread lock. It MUST be
re-assembled with thread lock as shown
loctite 648
loctite 648
loctite 243
loctite 648
loctite 243
loctite 243
To Next Page
Loading...
