Ozito TSB-1208 User Manual

TABLE SAW
210mm (8¼”) 1200W
INSTRUCTION MANUAL
SPECIFICATIONS
Motor: 1200W
Input: 230-240V ~ 50Hz
No Load Speed: 4,800/min
Blade: Ø210mm x Ø25 x 2.6mm
Depth Of Cut: 0-45mm
Bevel Angle: 0-45° left
Max. Cutting Capacity:
Bevel 90°: 45mm
Bevel 45°: 43mm
Table Size: 525x400mm
With Extension: 525x630mm
Dust Port: Ø35mm I/D / Ø40mm O/D
Weight: 14kg
TSB-1208
WHAT’S IN THE BOX
Push Stick
Table Saw
Rip Fence
Mitre Gauge
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase and is intended for DIY (Do It
Yourself) use only. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: blade,push stick,
spanners, bearings & carbon brushes
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0715
Spanners

Ozito TSB-1208 Specifications

General

Type	Table Saw
Blade Diameter	210 mm
Power	1200W
No Load Speed	4800 RPM
Cutting Depth at 45°	45 mm
Weight	12.5 kg

Summary

SPECIFICATIONS

WHAT'S IN THE BOX

3 YEAR REPLACEMENT WARRANTY

Warranty Warning

Actions that will void the warranty, including misuse and improper maintenance.

KNOW YOUR PRODUCT

SETUP & PREPARATION

Assembly Steps

Instructions for assembling the table saw, including extension table, blade guard, and rip fence.

SET-UP AND ADJUSTMENTS

Mitre Gauge Setup

Procedure for inserting and adjusting the mitre gauge for cuts.

Rip Fence Adjustment

Steps to adjust the rip fence for desired cutting width and parallelism.

Depth Of Cut Adjustment

How to adjust the saw blade's cutting depth using the dedicated knob.

Angle Of Cut (Bevel) Adjustment

Setting and locking the desired bevel angle for angled cuts.

Integrated Extension Table Adjustment

Adjusting and securing the extension table for supporting larger workpieces.

OPERATION

Operating the Table Saw

Instructions for turning the saw on/off and understanding overload protection.

Workpiece Handling

Correctly positioning and cutting workpieces using the rip fence or mitre gauge.

Push Stick Usage

Importance and use of the push stick for safe operation near the blade.

ELECTRICAL SAFETY

General Electrical Safety Precautions

Essential safety measures when using mains-powered tools.

GENERAL POWER TOOL SAFETY WARNINGS - PERSONAL SAFETY

Personal Safety and Work Area

Guidance on maintaining a safe work environment and personal protection.

Power Tool Use and Care

Best practices for using, maintaining, and storing power tools safely.

TABLE SAW SAFETY WARNINGS

Material and Blade Safety

Warnings regarding appropriate materials, blade selection, and guards.

Operational Safety Practices

Key safety procedures during operation, including using accessories.

MAINTENANCE

General Maintenance Precautions

Crucial safety steps before performing any maintenance on the table saw.

Changing the Blade

Step-by-step instructions for safely replacing the saw blade.

Carbon Brushes

Information on carbon brush wear, replacement, and potential damage.

Normal Operation (Sparking)

Explanation of visible sparking through housing vents as normal.

DESCRIPTION OF SYMBOLS

SPARE PARTS