Need help?Do you have a question about the PABX MS308 and is the answer not in the manual?
Overview of the PABX system's purpose, application, and benefits for businesses.
Highlights essential hardware features and common telephone functions of the PABX system.
Visual description and identification of the PABX unit's ports and indicators.
Details technical specifications, parameters, and crucial advice for safe installation and environmental placement.
Lists critical safety warnings to be observed during operation and installation.
Outlines the conditions and rules that must be followed before starting system programming.
Introduces fundamental commands for accessing and operating the programming mode.
Covers the configuration for enabling and disabling Central Office (CO) lines.
Sets the operational mode for CO lines: Auto-Attendant or Operator.
Covers recording, checking, and managing outgoing messages for system use.
Instructions on how to listen to the system's internal hold music.
Defines which extensions ring for incoming calls and ringing patterns.
Settings related to AA mode behavior, like supervisor and call handling.
Sets how extensions access outside lines: indirect or direct dialing.
Controls call barring and assigns calling restrictions to extensions.
Configures specific numbers or prefixes to be restricted for outgoing calls.
Manages special calling numbers and their assignment to classes.
Manages call duration limits and access to CO lines for extensions.
Details the procedure for changing extension numbers and their format.
Manages the system's central memory for speed dialing numbers.
Organizes extensions into groups for operational purposes.
Sets time limits for handling calls to unanswered or busy extensions.
Configures ringing durations for internal calls and transfers.
Sets timers for call forwarding and call holding functions.
Guides users on initiating outgoing calls using different dialing modes.
Details how to make and receive internal calls between extensions.
Explains how to answer calls in Operator and Auto-Attendant modes.
Describes how to put calls on hold (park) and pick them up from any phone.
Step-by-step guide on transferring incoming calls to other extensions.
Covers immediate call forwarding and forwarding on busy/no answer.
Provides a method to identify your own extension number if forgotten.
Allows authorized extensions to join an ongoing conversation.
Enables and configures the Do Not Disturb feature for extensions.
General| Model | MS308 |
|---|---|
| Category | Telephone System |
| CO Lines | 3 |
| Extensions | 8 |
| Number of Extensions | 8 |
| Number of CO Lines | 3 |
| Power Supply | AC 220V |
To Next Page
