PAC
®
| Ph. 866-931-8021 | support@pac-audio.com
©2016 Pacic Accessory Corporation
www.pac-audio.com
Rev. 121216
Page 5
Pacific Accessory Corporation
Amplier Integration Interface for
Chrysler / Dodge / Jeep / RAM
AP4-CH41
AmpPRO App (cont.)
Firmware Updates
The AmpPRO app will also allow you to update the interface with new rmware as it becomes available. Please visit www.pac-
audio.com or contact our tech support department to see if there is a rmware update for your interface.
Connect the interface to your PC and select "Firmware", then “Update Firmware”. Now select “Select File”. Finally, browse to the
place where you saved the le and select it. This will begin the updating process. Once nished, disconnect the interface from
the PC and resume normal operation.
To Previous Page
Loading...
