14
WARNINGS
Do not connect your set-top (or any other equipment such as a TV or VCR) to the AC power supply until you
have properly connected all the other cables.
Do not defeat the safety purpose of the polarized plugs on power cords. A polarized plug has two blades with
one wider than the other. This plug fits into the AC outlet in only one way; match the wide blade of the plug
to the wide slot of the AC outlet.
Connecting your TV to the AC power supply
If your TV has a rating of up to 500 W, connect the power cord from your TV into the POWER OUTLET connector
on the rear panel of your set-top. This saves a wall AC outlet (although, if your TV has a rating of more than
500 W, you must connect it to a wall AC outlet).
Connecting the power cord to your set-top
Before you connect your set-top to a wall AC outlet, connect the polarized socket on the set-top’s power cord into
the POWER INPUT connector on your set-top’s rear panel.
Connecting equipment to the wall AC outlets
Connect the polarized plugs on the power cords from your set-top, VCR, and any other equipment into wall AC
outlets. If these outlets have switches, switch them ON.
CONNECTING THE EQUIPMENT (cont.)
To Next Page
Loading...
