Need help?Do you have a question about the Packd C4 Series and is the answer not in the manual?
General| Brand | Packd |
|---|---|
| Model | C4 Series |
| Category | Outdoor Cart |
| Language | English |
Unpack components and verify all parts against the Bill of Materials for assembly readiness.
Details the specific hardware required for fastening shelf trays to end panels during assembly.
Hardware for securing mounting brackets to end panels and the shelf assembly to the vehicle structure.
Assemble shelf trays and end panels, then adjust shelf heights considering minimum wheel well clearance.
Attach mounting brackets to the shelf unit's end panels, aligning with the vehicle's horizontal rim.
Mark locations on the vehicle's horizontal rim for installing Plus Nuts after bracket attachment.
Drill holes and install Plus Nuts into the marked vehicle locations for secure fastening points.
Align bracket slots with Plus Nuts and fasten the shelf unit securely to the vehicle's interior wall.
Fasten the shelf unit to the vehicle subfloor using a square for precise 90-degree positioning.
Install a center support for longer units, securing it to the shelf and the vehicle subfloor.
To Next Page