Packd C4 Series - Page 13

13 | C4 A s s e m b l y & I n s t a l l a t i o n G u i d e
Without Floor Kit
Fasten the Shelf Unit to the floor using
square to position front 90° to the
floor. Use 1/4 Nylon Spacers where
necessary.
Tools Used:
Cordless Impact Driver
3/8” Nut Driver Bit
Large Square
Hardware Used:
8 x Hex Washer Head Screw #14 x 3/4”
1/4 Nylon Spacer
1/4 Nylon Spacers