PackLab MODULE 90 - User Manual

CO412006A0100.fmIDM
Keep this service manual to hand during the machine/
equipment's working life
IMPORTANT
Sede legale: Via A.Volta, 16 - 6030 S.Giorgio (MN) ITALY
Tel. 0376 372300 Fax 0376 372445
www.packlab.com - E-mail tech@packlab.it
Complete or partial reproduction of this manual is forbidden without the manufacturer’s prior written consent. The manufacturer implements a policy of continuous improvement and reserves the right to make changes that do not affect safety to this document without prior notice. © 2003 - Text,
illustrations and layout by IDM esperti in comunicazione tecnica - Forlì. The text in this manual is copyright and the intellectual property of IDM. It may be quoted in full or in part provided reference to the author is made.
Serial number
Edition
0
09-2003
ENGLISH
user manual
1
INDEX
GENERAL AND SAFETY
INFORMATION
Section
1
LABELING UNIT
MODULE 40/60/90/120
Section
5
MODULE
40/60/90/120

Summary

General and Safety Information

Purpose of the Manual

Explains the objective and scope of the service manual for authorized users.

Identification of Manufacturer and Machine

Details the information found on the machine's identification plate for safe operation.

Glossary and Terminology

Defines key terms used throughout the manual to ensure complete understanding.

Methods for Requesting Assistance

Provides instructions on how to contact the manufacturer's Service Department for support.

Accompanying Documentation

Lists additional documentation provided with the machine, besides the main manual.

Safety Regulations

Outlines general safety rules and precautions for design, construction, and operation.

Labeling Unit

Technical Information

Provides description of the machine, configurations, and technical specifications.

Instructions for Handling and Installation

Covers packaging, unpacking, machine handling, and installation procedures.

Adjustment Instructions

Details how to adjust various components of the labeling unit for optimal performance.

Operating Instructions

Explains how to operate the machine, including controls, basic functions, and parameter setting.

Maintenance Instructions

Provides guidance on cleaning operations and procedures for maintaining the machine.

Fault Finding Instructions

Lists common problems and their corrective actions for troubleshooting the labeling unit.

Part Replacement Instructions

Describes procedures for replacing various components of the labeling unit.

PackLab MODULE 90 Specifications

General

Brand	PackLab
Model	MODULE 90
Category	Industrial Equipment
Language	English