26
© Pacojet International AG 2022
CLEANING
Note: It is absolutely mandatory that the following cleaning procedures be carried out
to maintain the functionality of the device and to ensure cleanliness.
• Before first use:
Conduct a complete cleaning cycle.
• At the end of the day:
Conduct a complete cleaning cycle.
• After extended periods of disuse: Conduct a complete cleaning cycle.
Remove the preliminary scraper from the spray
guard and clean it separately using a non-marring
object. The preliminary scraper is not installed
during the cleaning process.
Select “Clean” in the main menu.
1 2
2-STAGE CLEANING PROCESS
Clean the tool coupler with a soft, non-abrasive
brush and cloth. Press “OK” to check off the first
cleaning cycle as complete.
3
Pro tip: Press the arrow to the right of a
cleaning cycle to view instructions.
To Next Page
Loading...