Pacojet 4 - General Information;Technical Specifications

7
© Pacojet International AG 2022
This operating manual contains all information
and instructions required for safe handling of the
device. Please read through the included safety
instructions carefully before using the device for
the first time.
Pacotizing
®
The core function of the device is pacotizing
®
.
This function processes deep-frozen foods into
ultra-fine preparations without thawing. The
device micro-purées and mousses in one step.
Processing happens in the standard function using
overpressure, resulting in volume expansion and
flavor intensification.
The device also offers cutting and whipping
functions. See the section titled “PACOTIZING
®
–
CUTTING – WHIPPING” for a description of each
function.
Aspects related to safe food handling
Follow hygienic practices and comply with food
safety regulations during food preparation! The
food preparation to be processed may heat up
during pacotizing
®
; therefore, subsequent food
preparation must occur quickly to avoid spoilage
and thus a health hazard.
Instructions for use
Before pacotizing
®
, the food product must
have been deep frozen for at least 24 hours
in a pacotizing
®
beaker at a temperature of
–20°C / –4°F to achieve a steady temperature of
–20°C / –4°F in the pacotizing
®
beaker.
During food preparation, the contents of the
pacotizing
®
beaker may not exceed the fill line.
Cavities must be filled with liquid (water, broth, etc.).
After filling the pacotizing
®
beaker and before
re-freezing food preparations remaining in the
pacotizing
®
beaker, the surface must be smoothed
out.
Pacojet Coupe Set
The optional Pacojet Coupe Set is exclusively for
non-frozen, boneless food preparations that can
be processed repeatedly without a change in
temperature caused by heat transfer.
GENERAL INFORMATION/TECHNICAL SPECIFICATIONS
GENERAL INFORMATION
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by Alator AG could void the user‘s authority to
operate the equipment.
RSS Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two
conditions:
• This device may not cause interference.
• This device must accept any interference, including interference that may cause undesired operation
of the device.
• The compliance distance is zero.