pakedgedevice&software inc
Installing the Router
1. If mounting the router in a standard 19” AV rack, attach the rack-mounting
brackets that come with the router to the sides. If not rack-mounting, ensure that
the router is physically mounted near power and network connections.
2. Connect power to the device.
3. Connect an ethernet cable from your computer to any of the LAN ports on the
router.
Changing the Router Password
It is strongly recommended that you change the default password for the router. Please refer
to the user manual for step by step instructions.
Accessing the Router GUI
1. Make sure your network card is set to obtain an IP address automatically. Then open
any internet browser and go to the address http://192.168.1.99 or you can simply type
pakedgerouter.com Note: For best results we recommend using Mozilla Firefox as your
web browser.
2. Enter the default username pakedge and the password pakedger. Click login.
Connecting to the Internet
The router supports the three main types of internet connections:
• DHCP (Typically used by cable companies and DSL basic service)
• Static IP (Fixed public IP address mostly used by Business Class Broadband services)
• PPPoE (Used by DSL companies such as AT&T)
Determine what type of internet connection you have from your Internet Service Provider
(ISP), and then follow one of the three instruction sets below to connect the router to the
internet.
To Next Page
Loading...
Need help?
General
