Pakedge Device & Software RE-1 - Changin the LAN IP

pakedgedevice&software inc
4. Enter the username that the ISP assigned under the PAP/CHAP username eld. Enter
the password in the PAP/CHAP password eld. Click Apply when nished. The router
is now setup for PPPoE.
Changing the LAN IP
The default IP address of the router is 192.168.1.99. If you need to change the IP address of
the router or change the entire network address take the following steps.
1. Click on Network Zones.
2. Click Edit under LAN zone.