Pakedge Device & Software WAP-VKIT - Adding a Security Profile

WAP-VKIT User Manual
24
5.5.1 Adding a Security Profile
At the bottom of the Security Profile Table window, click Add.
Note:
Primary and Secondary RADIUS Profile Configuration
If your security profile is based on RADIUS Server User Authentication,
you’ll need to create a Primary RADIUS Profile before the profile will
appear in the drop-down list.
Table 1: The following Security Profile Configuration Settings table summarizes the settings
for some common security profiles, based on the L2 Mode selected. (Note: Optional
settings are italicized.)
Table 1: Security Profile Configuration Settings
L2 Mode
Encryption
RADIUS Server
Key Settings
Captive Portal
Clear
WebAuth
802.1X
WEP128 or
WEP64
Primary
Secondary
(Configure using
the Radius Profile
tab)
Static WEP Key Index
Rekey Period
Key Rotation
WPA2/Mixed
(WPA2-
Enterprise)
COMP-AES
Primary
Secondary
(Configure using
the Radius Profile
tab)
WPA (WPA-
Enterprise)
TKIP
Primary
Secondary
(Configure using
the Radius Profile
tab)
Key Rotation